Cutter Storage v1.1 FS22
Cutter Storage v1.1 FS22
What was changed:
Clip distance have been adjusted
Textures have been swapped and adjusted
Parts of the 3d model were redone and new masks were created
BeaconLights have now been added
Added visual icon markers
A new universal bearing has been added, with which it is now possible to decide for yourself which cutting unit is on which compartment. All standard cutters are registered with ModSchneidwerke that have the same xml/name, it should also work.
Another warehouse has been added and the Ropa cutterbars can now also be stored. With the ropa camp it is also the case that you can decide where which goes.
In this cutter bearings pack are included 7 different bearings for cutter and shredder.
What is included in this pack:
Capello cutterbar bearing
Price: 45000€
Maintenance: 15€ per day
Function:
By means of the 5 shelves it is possible to store the cutting units Spartan610, Diamant8, Diamant12, Helianthus5700 and the Helianthus12000.
To the left and right of the shelf is the control panel from which the shelf can be operated. There are several triggers in front of the control panel that allow the opening of the panel and the corresponding triggers to move the 5 shelves in and out.
Cutter Case
Price:45000€
Maintenance: 15€ per day
Function:
By means of the 5 shelf compartments it is possible to store the cutterbars TerraFlex 3020, TerraFlex 3050_28, TerraFlex 3050_41, Draper 3162, Header 4408 and the Header 4418N.
Cutterbar bearing Claas
Price:45000€
Maintenance: 15€ per day
Function:
By means of the 5 racks it is possible to store the cutterbars DirectDisc500, ConvioFlex 1080, ConvioFlex 1380, Corio875FC, Corio1275C, Orbis750 and the Orbis900.
Cutterbar bearing Fendt
Price:45000€
Maintenance: 15€ per day
Function:
By means of the 5 shelves it is possible to store the cutterbars Powerflow,Powerflow30FT and the Dynaflex9255.
Cutterbar storage JohnDeere
Price:45000€
Maintenance: 15€ per day
Function:
By means of the 5 shelves it is possible to store the cutterbars Header608C, Header625X, HeaderC16F, HeaderHD45xand the HeaderHD50F.
Cutterbar storage Massey Ferguson
Price:45000€
Maintenance: 15€ a day
Function:
By means of the 5 racks it is possible to store the cutterbars Powerflow,Powerflow30FT and the Dynaflex9255.
Cutterbar storage NewHolland
Price:45000€
Maintenance: 15€ per day
Function:
By means of the 5 shelves it is possible to store the cutting units CR980_830, SuperFlex25, Varifeed28, NewHolland_plus390, NewHolland_plus375, NewHolland_plus360 and the NewHolland_plus345
Bjoern_AkA_FactoryMODS
this is a great mod, Just one thing I cannot figure out, I cannot get the triggers to switch to different storage shelves. they only seem to work for one of the shelves on each side. can anyone help me?