Water Pump Pack V1.4.2.1 FS25
Water Pump Pack V1.4.2.1 FS25
Water Pump Pack – Performance, Hose System & Realistic Fluid Transfer Technology!
This pack brings 7 rotary lobe pumps, connectable hoses and a complete fluid transfer system to Farming Simulator 25.
Water from lakes, rivers, tanks or MapFlood floodwater can be collected, transferred and pumped into vehicles, containers or other bodies of water.
Pumps
The pack includes various variants:
Rear three-point hitch
Front three-point hitch
Forklift skid
Crane lifting frame
Roll-off container pump station
Depending on the model, the drive is powered by the PTO or a diesel engine. The roll-off container has a 400-litre diesel tank.
Controls
Left Alt + 1/2: Start/stop engine
Left Alt + 3/4: Turn pump on/off
Left Alt + 5/6: Change RPM
Left Alt + 7: Refuel diesel
Left Alt + N: EMERGENCY STOP
PTO pumps operate between 350 and 1,000 RPM.
Displays provide information about RPM, flow rate, pressure, vacuum and fuel level.
Hose System
Hoses can be picked up individually, carried, laid out, extended and connected to one another.
Left Alt + 8: Connect/extend hose
Left Alt + 9: Connect/disconnect coupling
Left Alt + 0: Stow hose
Left Alt + V: Stow all hoses
The hoses have their own physics, smooth bends and sturdy couplings.
Blue = suction side
Red = pressure side
Pumping Fluids
Supported sources:
Lakes and rivers
MapFlood floodwater
Tanks and trailers
Water, milk, slurry, digestate, liquid fertilizer, herbicide, diesel, AdBlue, oils and other liquids
Maximum suction height: 8.5 m.
Vehicles, tanks and unloading points can be filled on the pressure side. Liquid can also flow directly from a free hose end.
MapFlood floodwater is correctly taken into account when pumping it out.
Pumps in Series
Multiple pumps can be connected in series. The pressure outlet of one pump is connected to the suction side of the next.
When all pumps are active, their flow rates are added together. This also makes it possible to build longer transfer lines.
Compatibility & Features
Interactive Control
Attach Implements Manually
Realistic Exhaust Smoke
Original GIANTS diesel sounds
Freely selectable pump and hose colors
Dedicated shop category: Water Pumps & Hoses
V1.4.2.1
New water jet: every frame follows the real ballistic trajectory (exit velocity based on flow rate and hose cross-section, direction of the hose end, gravity) until it hits the ground or water surface, as one continuous stream without discontinuities in hose thickness, using the game’s waterfall material; the game’s impact spray at the point of impact is scaled to match the flow rate (the distorted rice-field water surface has been removed); fittings and signs on the finished model have been measured: pressure gauges are placed on the uppermost surface beneath the dial, color rings sit around the actual pipe circumference, and signs are placed only on straight pipe sections (long, two-line, or short depending on the available space) — nothing is embedded in the model anymore; Interactive-Control buttons are displayed 1 m farther away and remain visible.
MrHunter0815
