30′ Flatbed Autoloading Bale Trailer v2.0.0.1 FS22
30′ Flatbed Autoloading Bale Trailer v2.0.0.1 FS22
Changelog 2.0.0.1:
Fixed an issue that the bale autoload would not unload bales correctly with gamepads.
Added dedicated keyboard and gamepad controls for bale unloading.
Changed gamepad keyboard settings for raising and lowering the gooseneck hitch and pin hitch because they conflicted with other controls.
Cleaned up and reworded the description to remove un-necessary and redundant descriptions.
30′ (9.5 meter) Flatbed Trailer Combo:
The trailer frame, rims, tipper body, log forks, cover, liquid tank, and liquid tank trim are all color selectable.
The trailer has 6 different body configurations:
Standard flatbed bale/transport trailer (cost $15,000).
Tipper body without cover (additional cost $15,000).
Add cover to tipper body (additional cost $1000).
Log forks (additional cost $1,500).
Liquid tank (additional cost $10,000).
Slurry/Digestate Spreader with 24 meter width (additional cost $2,500).
Can be configured as a flat hitch or a gooseneck trailer hitch.(cost $1,500).
The gooseneck coupler and pintle hitch height can be adjusted for different vehicle heights.
A rear trailer hitch is also an option. (cost $100). *Rear trailer hitch is not available with the Slurry Spreader configuration*
The standard Lizard tires and rims are custom made.
The trailer is equipped with ramps for loading and transporting small machinery.
Can choose standard with ramps or to remove the ramps for a credit of $250.
Custom painted dirt and wear textures.
There are 2 different tipper capacity configurations, standard (34,650 liters) and with body extention (41,400 liters cost $2000)
Can choose between standard tip height, or a lower tip height for tipping inside buildings or structures with low roofs.
Can be configured with a wooden deck (cost $500) or steel deck which is standard.
Added many different colors to choose from in addition to the standard ones.
Rear work lights.
There is a solid Fertilizer/Lime spreader as an additional configuration (cost $12,000).
Fertilizer/Lime spreader has variable spreading widths from 12 meters to 42 meters.
Many different “Un-Realistic” fill capacity configurations for the tipper, tank, and fertilizer/lime spreader for those players that do not want to play realistically. (cost $25,000)
Custom modeled strobe lights created by me on the flatbed frame and spreader.
The strobe lights have real lights so they will reflect off the surroundings if the game settings are set up for that option.
There are dedicated gamepad button controls to adjust the dividing floor for the livestock trailer configuration along with the gooseneck and pintle hitch heights.
Flatbed trailer can be configured to autoload all types of round bales, and square bales.
Support for the FS22_UniversalAutoload mod.
NOTE* The FS22_UniversalAutoload mod is not required for bale autoloading to work however for pallets and logs to autoload you will need the FS22_UniversalAutoload mod installed as well. (not available for consoles)
To use autoload feature with the FS22_UniversalAutoload mod, the trailer’s configuration needs to be set to the standard “Flat Bed” configuration (first body configuration choice).
It is also recommended to configure the trailer without ramps when using autoload.
Bale capacities are: (without using FS22_UniversalAutoload mod)
200 Small Square Bales (1.2 meter Conventional Bales)
32 1.8 meter Square Bales
26 2.2 meter Square Bales
24 2.4 meter Square Bales
16 2.4 meter Square Hesston Bales
30 1.25 meter Round Bales
22 1.5 meter Round Bales
18 1.8 meter Round Bales
7 Round Cotton Bales
2 Square Cotton Bales
To use autoload, key “B” starts and stops loading.
Then key “Y” is for unloading bales using the left mouse button to place them where desired or to unload them directly to the bed for manual unloading.
After unloading, key “Y” must be pressed again to “reset” the autoloading process for the next load.
Livestock trailer configuration (cost $8,000).
Livestock trailer body and decals are color selectable.
Livestock trailer decals can be configured to have all, none, or anything in between.
Livestock trailer capacities are:
12 Cows
12 Horses
48 Pigs
48 Sheep
320 Chickens
NOTE: The livestock trailer has a movable dividing floor (middle mouse button or keyboard keys K and M) for the second tier of pigs, sheep, and chickens.
When loading the other animal types (cows and horses) into the trailer, the dividing floor needs be moved down and out of the way so the animals will not spawn in the middle of the dividing floor.
The dividing floor should be moved up for loading a full trailer load of pigs, sheep, and chickens or the second tier of animals will appear to be “floating”.
Changelog 2.0.0.0:
Removed the need for multiple trailers to autoload bales.
Now the same trailer will load all bales in-game including all of the bales with FS22_selectableBaleCapacity mod.
Updated the bale autoload capacities.
Added ability to autoload Hesston bales.
Adjusted the un-realistic fill capacity discharge rates for dump trailer and tank trailer configurations.
Re-configured color configurations to only show when needed.
Fixed color configurations not showing the correct prices.
macktrucker921
