Autodrive Bergblick V1.0.5.0 FS25
Autodrive Bergblick V1.0.5.0 FS25
AutoDrive course for Bergblick (v1.0.5, 05/02/2025). All routes driven including farms, productions, sales points, biogas plant, field edges. For small/medium vehicles. Cornering speed: 60%. With legend and notes.
AutoDrive course for the “Bergblick” map, version 1.0.5 from May 2nd, 2025
Retracted areas:
Two-lane and single-lane roads
Field paths as a secondary route
Production and sales points
Biogas plant
Two courtyards
Field edge courses as a branch route
Legend for route points:
< = Unloading in silos/productions
> = Loading the trailers
</> = loading/unloading
(man) = manual loading/unloading
(F) = Target point on the field
EK = purchasing point
VK = point of sale
(Solo) = Use without attachments or trailer
Pal. = pallets
Bal. = bale
RWD = Reverse
(Gate) = The gate must be opened
(Z) = field is fenced
Notes on use:
Set corner speed to 60%
Select the nearest field exit for downhill drivers
Small to medium sized vehicles recommended as some production and sales locations are very tight
Driven in with:
Steyr Absolut 6280 CVT and Fliegl ASW 271
Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex
Steyr Absolut 6280 CVT and Kaweco Profi II + Bomech Multi Profi 21/15
Lindner Lintrac 130 and Lizard MKS 8
Mercedes-Benz Actros L 1863 with Krampe SKS 30/1050 (not recommended)
Tested with:
Fendt 5275 C SL and Fendt FreeFlow 25 FT
Steyr Absolut 6280 CVT and Fliegl ASW 271
Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex
Folder structure of the production and sales points:
04.01 = KVA = potato processing plant
04.02 = GTM = grain mill
04.03 = SPN = spinning mill
04.04 = ZKF = sugar factory
04.05 = SGW = sawmill
04.06 = KSF = Cannery
04.07 = ZMW 1 = cement plant 1
04.08 = ZMW 2 = cement plant 2
04.09 = BAK = Bakery
04.10 = MGH 1 = Medium Greenhouse 1
04.11 = MGH 2 = Medium Greenhouse 2
04.12 = GGH 1 = Large Greenhouse 1
04.13 = GGH 2 = Large Greenhouse 2
04.14 = FLR = butcher shop
04.15 = MLK = Dairy
04.16 = BGA500 = biogas plant 500kW
Notes:
For the “Farmhouse 2” and “Farmhouse 3” sales points, fields 50 and 51 must be purchased
The wedge silos of the BGA500 cannot be filled automatically because there is not enough space in front of them
The hall gate at yard 2 (ball storage) must be opened. AutoLoad unloading takes place on the right, loading on the left or manually
At Court 1, the workshop can be accessed separately through the hall gates. The exit from the silo for seeds/mineral feed is only possible through the middle of the hall. The middle lane must remain clear
Installation:
To use the courses, start a new save game or copy the “AutoDrive_config.xml” file into the save game folder of the “Bergblick” map.
Required mods:
Autodrive
Bergblick
alex83we
