Aussie Fencing Build Kit v1.0.0.0 FS25








Aussie Fencing Build Kit v1.0.0.0 FS25
Build Australian Colorbond-style fencing from the ground up in Farming Simulator 25. Plan your fence with pegs, drill the holes, fit and concrete the posts, then install the bottom rails, individual sheets and top rails.
Buy and transport your materials, mix concrete in a usable wheelbarrow, and use purchased hand tools to complete each stage. Choose from 15 fencing colours, with separate colour choices for posts, rails and sheets. Construction progress, materials and curing times are saved.
Features include reusable string lines, equal 2.4-metre fence bays, corner planning, scoopable excavated dirt and manual dismantling. Single-player only. TerraFarm is not required.
What you need
Buy these from Jamo Modding Tools:
– String-line reel
– Concrete bucket
– Cordless drill
– Old Shovel
– Mixing wheelbarrow
Buy materials from Jamo Modding Pallets:
– Posts: 25, 50 or 75
– Sheets: 25, 50 or 75
– Combined rails: 25, 50 or 75 of each rail type
– Cement: 25 bags per pallet
You also need an owned water tanker containing water. Transport your supplies to the work area.
How to build your fence
1. Place the starter peg.
Open Construction → JAMO MODS → Placeables and place a fence starter peg on your land.
2. Plan the fence line.
Close Construction mode, put the string-line tool away and approach the starter peg. Press R to begin planning. Walk to each corner or endpoint and press R to place it. Sections snap to complete 2.4-metre bays. After placing the final endpoint, press Ctrl + Enter to finish.
3. Attach a string line if wanted.
Equip your purchased reel. Press R at a planned peg or post to attach the start, then walk to another and press R again. Each reel supports one active span, up to 100 metres. Equip the same reel near either end and press R to rewind it for reuse.
4. Drill the holes.
Approach each marked post position and press R when prompted. Stay beside it until drilling finishes. Excavated material can be collected with a compatible loader or skid-steer bucket.
5. Install the posts.
Take a post from its pallet with R, carry it to a drilled hole and press R to fit it.
6. Prepare the concrete.
Take one cement bag from its pallet and carry it to the empty wheelbarrow. Press R to empty it. Bring an owned tanker containing at least 20 litres of water within 3 metres, then use the water prompt. Equip the Old Shovel and press R to mix.
7. Concrete the posts.
Equip the purchased bucket and fill it at the wheelbarrow. Carry it to an installed post and press R to pour. Return for another bucketful as needed. One cement bag and 20 litres of water provide three hole-filling pours in this mod.
8. Allow the concrete to cure.
Curing takes 60 in-game minutes. You can work on other holes while waiting.
9. Fit the bottom rail.
Take a bottom rail from the combined rail pallet and install it between two cured posts.
10. Install the individual sheets.
Carry one sheet from its pallet to the bay, equip your purchased drill and press R to install it. Repeat for the remaining sheets. Install every sheet on that fence project from the same side.
11. Fit the top rail.
Once all sheets in the bay are installed, collect and fit its top rail.
Control Action
R Interact, take/return materials, start or stop work
Ctrl + Enter Finish the planned fence line
Ctrl + Backspace Undo the last planned corner
Ctrl + Delete Cancel the planning draft
Ctrl + X Toggle building/dismantling near a fence
Ctrl + R Take/return recovered materials near the original starting position
E Enter or exit the wheelbarrow
W/A/S/D Move and steer the wheelbarrow
C Change vehicle camera
Use the normal FS25 hand-tool controls to select and equip purchased tools. Your own key bindings may differ.
Helpful notes
– Stay on foot and close to the component while working.
– Carry one material item at a time; return it to its source pallet to put it back.
– Exit the wheelbarrow before loading, mixing or filling the bucket.
– Finish planning before saving—unfinished planning drafts are temporary.
– To dismantle, enable dismantling mode and follow the prompts, starting with the top rail.
Required mods:
Store Category (Jamo Modding)
JAMO MODDING
